货号     064638 、
完整参数 ▼
适用于    Dionex 免试剂离子色谱 (RFIC) 系统
操作    通过碳酸盐选择性透气膜壁扩散法去除抑制型淋洗液中的二氧化碳。
类型    碳酸盐去除装置
孔隙体积    80 μL
描述    2 mm CRD 300
Unit Size    Each 1
货号    062983
完整参数 ▼
适用于    Dionex 免试剂离子色谱 (RFIC) 系统
操作    通过碳酸盐选择性透气膜壁扩散法去除抑制后淋洗液中的二氧化碳。
类型    去碳酸盐装置
孔隙体积    225 μL
描述    4 mm CRD 200
Unit Size    Each 1
货号    062986
完整参数 ▼
适用于    Dionex Reagent-Free 离子色谱 (RFIC) 系统
操作    通过碳酸选择性透气膜壁扩散法去除抑制型淋洗液中的二氧化碳。
类型    去碳酸装置
孔隙体积    80 μL
描述    2 mm CRD 200
Unit Size    Each 1
货号    064637
完整参数 ▼
适用于    Dionex 免试剂离子色谱 (RFIC) 系统
操作    通过碳酸盐选择性透气膜扩散法去除抑制型淋洗液流中的二氧化碳。
类型    碳酸盐去除装置
孔隙体积    225 μL
描述    4 mm CRD 300
Unit Size    Each 1
货号    064905 
完整参数 ▼
适用于    Dionex 标准孔 IC 系统和柱中的碳酸盐淋洗液化学品
操作    通过碳酸盐选择性透气膜壁扩散法去除抑制型洗脱液流中的碳酸盐。
类型    配有蠕动泵套件的碳酸盐去除装置
孔隙体积    225 μL
描述    配有蠕动泵套件的 4 mm CRD 300
Unit Size    Each 1
货号    064906 
完整参数 ▼
适用于    Dionex Reagent-Free 离子色谱 (RFIC) 系统
操作    通过碳酸盐选择性透气膜壁扩散法去除抑制型淋洗液中的二氧化碳。
类型    配有蠕动泵套件的碳酸盐去除装置
孔隙体积    80 μL
描述    配有蠕动泵套件的 2 mm CRD 300
Unit Size    Each 1
货号    068474
完整参数 ▼
适用于    使用 Dionex 微孔系统和 IC 色谱柱的碳酸盐淋洗液
操作    通过碳酸盐选择性透气膜壁扩散法去除抑制型淋洗液中的碳酸盐。
类型    配有真空泵套件的碳酸盐去除装置
孔隙体积    80 μL
描述    配有 VP 真空泵套件的 2 mm CRD 300
Unit Size    Each 1
货号    068475 
完整参数 ▼
适用于    离子色谱
操作    通过碳酸盐选择性透气膜壁扩散法去除抑制型洗脱液流中的二氧化碳。
类型    配有真空泵套件的碳酸盐去除装置
描述    配有 VP 真空泵套件的 Dionex CRD 300 (4-mm)
Unit Size    Each 1
货号    072054
完整参数 ▼
适用于    在 Dionex 毛细管型 IC 系统使用氢氧根和硼酸盐体系
操作    通过碳酸选择性透气膜壁扩散法去除抑制型淋洗液中的碳酸。
类型    毛细管型碳酸盐去除装置
描述    0.4 mm 毛细管型 CRD 200
Unit Size    Each 1

Plumbed between the suppressor and detector cell, carbonate transfer is aided by a countercurrent flow of basic solution.

Dionex CRD 300 Carbonate Removal Device

• Designed for use with carbonate eluent-based chemistries using Thermo Scientific? Dionex? IC columns

• Removes carbonic acid from the suppressed carbonate eluent

• Provides a detection system that is similar to systems using hydroxide eluents

• Reduces the baseline for higher sensitivity

• Increases linearity range

• Available in two formats:

• Dionex CRD 300 (4mm) for standard bore systems

• Dionex CRD 300 (2mm) for microbore systems

Dionex CRD 300 can be installed in any Dionex IC system running carbonate as an eluent with a Dionex AERS 500 suppressor. The device requires either a constant flow of basic solution from a peristaltic pump or evacuation by a vacuum pump. See Dionex CRD Carbonate Removal Device Accessories for peristaltic pump and tubing. The Dionex CRD requires no reagents or software control.

Dionex CRD 180 and 200 Carbonate Removal Devices
The Dionex CRD 180 and 200 device enhances IC signals by continuously removing carbon dioxide from the sample on any Dionex? Reagent-Free? IC (RFIC?) system using hydr[oxide eluent.

• Designed for use with hydroxide- and borate-based chemistries using Thermo Scientific? Dionex? IC columns

• Removes the carbonate introduced from samples with high levels of dissolved carbon dioxide

• Improves integration and quantitation of some analyte peaks that elute close to carbonate, such as such as sulfate

• Available in several formats:

• Dionex CRD 200 (4mm) for standard bore systems, including standard bore columns packed with 4μm resin

• Dionex CRD 200 (2mm) for microbore systems, including microbore columns packed with 4μm resin

• Dionex CRD 200 (Capillary) for capillary-scale systems (0.4mm columns) using flow rates of 5–30μL/min

• Dionex CRD 180 (Capillary) is a version of the Dionex CRD 200 that has reduced internal volume and supports carbonate removal from 0.25mm and 0.4mm capillary columns

The Dionex CRD 180 and 200 device is easily installed in any Dionex RFIC system equipped with an eluent generator; a Thermo Scientific? Dionex? CR-ATC Continuously Regenerated Anion Trap Column; and a Thermo Scientific? Dionex? AERS? 500 Anion Electrolytically Regenerated Suppressor or Dionex? ACES? 300 Anion Capillary Electrolytic Suppressor.